Integrated security systems

We help protect your personnel, property and infrastructure.

So you can focus on what matters most. We design, install and modernize integrated security: cameras, intercoms, access control and real-time alerts, built around your needs and budget.

A walkthrough is a free visit: we walk your site with you and send one written plan. No obligation.

Scroll sequence: the physical building; the devices already on it, each named in place - Camera 01, Camera 02, Camera 03 and Camera 04, the access readers, the side-entry door contact, the motion sensor and the IoT sensors; those systems connected; a digital twin of the building assembling from their signals, with its floors and zones named; then an illustrative after-hours chain in which each event triggers the next - one, an intruder is detected at the side door; two, the trail through the building is mapped on the twin; three, Camera 03, the camera on that route, starts recording; four, the on-call team is alerted; five, first responders are sent to the right place at the right time; and the model settles onto the building.

One picture. One response.

Book a Free Site Walkthrough

Who we protect

Security for houses of worship, schools and workplaces.

From churches, synagogues, mosques and temples to schools, offices and nonprofits, we start with a walkthrough of your building.

  • A place of worship and its entrance at dusk.

    Places of worship

    Faith communities

    We focus on safety and security so your community can focus on faith, prayer and gathering.

    • Churches
    • Synagogues
    • Mosques
    • Temples
  • A school entrance and campus walkway at dusk.

    Education

    Schools and daycare

    Calm, controlled entries so students, staff and families can focus on learning.

    • Schools
    • Daycares
    • Campuses
  • The glass entrance of an office building at dusk.

    Workplaces

    Commercial properties

    Secure lobbies, tenant doors and parking, so your teams can focus on the work.

    • Offices
    • Retail
    • Mixed-use
  • Colleagues walking the outside of a building together to plan its security.

    Nonprofits and more

    Any organization with open doors

    If people come and go through your doors, we start with a walkthrough of your site.

    • Nonprofits
    • Community spaces
    • Public buildings

What we install

One integrated system, designed and installed by the IoTwinTM team.

How it connects

Each system reports its own part. The twin puts the parts in one place.

A camera shows a view. A door reports an open. A sensor flags a change. Each does its job, and each tells you one part of what is happening.

The digital twin is where IoTwin is heading: one model of your building that places those signals where they happen, so the people responsible see the door, the camera that covers it and the route behind it together. It is built on what we install, and it is never a requirement for an install.

See the twin concept

Illustrative concept

Your building

Entries, doors, routes and floors, walked with you on the first visit.

01

What we install

Cameras, access control, video management, IoT sensors and emergency response technologies, working as one system from the day of handover.

02

The digital twin

One model that shows those systems in place. The direction we are building toward.

03

Who you work with

A Boston team that installs its own work.

Headquarters

Boston, MA

100 Cambridge St, 14th Floor. Serving organizations across the US.

Founder and CEO

Ori Wald

With an executive, leadership and advisory team. Meet the team

Before you book

What people ask before a walkthrough.

If your question is not here, call or email and a person answers.

Can I work with IoTwin just for cameras or access control?

Yes. Most projects start with one system, often cameras or a few doors. A single entry gets the same attention as a whole campus.

Which organizations does IoTwin work with?

Any organization at high risk or with open doors: houses of worship, schools, nonprofits, commercial and multi-tenant buildings, and others. If people come and go through your doors, the walkthrough applies.

What is a digital twin, and do I need one?

A digital twin is a model of a physical building that shows its cameras, doors and sensors in place. It is the direction IoTwin is building toward. You do not need one to start, and no install depends on it.

Where is IoTwin based?

Headquartered in Boston, serving organizations across the US. Contact the team to discuss your location and project.

Do I need to prepare anything?

No. Show us the building and introduce us to the people who run it. Floor plans or notes on existing systems help if you have them, but they are not required.

How to start

Three steps from a first visit to working systems.

The walkthrough is free, by appointment, and usually takes 45 to 90 minutes.

01 / WALK

Show us the building.

You walk us through it and introduce the people who run it. We look at the entries, the doors, the routes and what is already installed.

02 / PLAN

Get one written plan.

It sets out what the building has, what it needs and what comes first, sized to the building.

03 / INSTALL

Our team installs it.

The people who planned the work do the work, hand it over to your staff and stay your point of contact.

Start here

Book a walkthrough of your building.

Tell us about the building and we will set a time. No obligation, and no pitch on the day.

A direct line to IoTwin.

Headquarters
100 Cambridge St, 14th Floor, Boston, MA 02114